To do this logic you need:

Steps

1. Pulse Cube

  • Place the Pulse Cube

You can find on inventory in the advanced logic tab.

  • Click with the right button mouse at the Pulse Cube and go to the settings.

The Enable Time is time of you want to the fire is on.

The Disable time is the time of you want to the fire is off.

The lower the value of the two, the greater the frequency the fires blink.

2. Fire

  • Place the Fire.

You can find on inventory in the logic tab

  • Connect the red trigger of Fire into the blue trigger of Pulse Cube.

Explaining

The pulse cube will send energy with intervals of time to the fire cube, in this way the fire will blink according to the desired times in the pulsar

Video

Other Uses

You can use this logical system too for:

Community content is available under CC BY-NC-SA 3.0 unless otherwise noted.