Logic Tutorial: Blinking Smoke
To do this logic you need:
Steps[edit | edit source]
1. Pulse Cube[edit | edit source]
- Place the Pulse Cube
You can find on inventory in the advanced logic tab.
- Click with the right button mouse at the Pulse Cube and go to the settings.
The Enable Time is time of you want to the smoke is on.
The Disable time is the time of you want to the smoke is off.
The lower the value of the two, the greater the frequency the smoke blink.
2. Smoke[edit | edit source]
- Place the Smoke.
You can find on inventory in the logic tab
- Connect the red trigger of Smoke into the blue trigger of Pulse Cube.
Explaining[edit | edit source]
The pulse cube will send energy with intervals of time to the smoke cube, in this way the smoke will blink according to the desired times in the pulsar
Video[edit | edit source]
Other Uses[edit | edit source]
You can use this logical system too for: